Vega Bond V600 Closed Cell Spray Foam Fast Rise 600 Board Feet Kit

vbinsulationSKU: VBV600-CCSFFR200-BFK
filler

Price:
Sale price$869.00

Description

 This product SHIPS FREE !

 

Closed cell formula for new construction or renovation project for basements, attics, or anywhere you would need an air-tight seal. Unlike many of our competitors, this kit comes ready to spray with a 15 ft. Gun/Hose Assembly, required safety gear, and 2 fans & 6 Cone Nozzle Tips.

  • R-Value R-7 per inch. Apply to your exposed walls such as the basement, roof crawl space, foundation, concrete, or subgrade.
  • ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)
  • Stops Mold and Moisture.
  • Completely seals out unwanted air leaks.
  • Protects against dust, air infiltration, and sound.
  • Ready-to-use, disposable and recyclable.

If you are calculating the area of a wall using the wall width and height. If it is a ceiling, roof, basement, foundation, etc. then use the length and width of the surface area. 

Calculator placeholder

 

HOW TO USE:

Whether you’re a seasoned professional or using a spray foam kit for the first time, here, you’ll find helpful information on how to use the Vega Bond spray foam insulation kit for the best results.

What’s In The Package? " Mask not Included"

  • Closed Cell Spray Foams Kits Fast Cure
  • Spray Nozzles(6 Cone Nozzles and 2 Fan Nozzle)
  • Spray Foam Hose and Applicator Assembly 
  • Safety Coverall
  • Safety Glass
  • Gloves
  • User Manual
  • Foam Cleaner

 How To Use

  • Wear your protective gear including safety glass, plastic hand gloves, and a protective work suit.
  • Thoroughly clean and dry the area you want to apply the foam
  • Ensure the tanks are between 75° F to 85° F, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to an electric heater.
  • Fix your spray foam insulation kit as specified in the manual by securely connecting the hoses to the tanks. Then apply petroleum jelly on the spray gun face before attaching the nozzle. Shake the canisters for at least 3 mins.
  • Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes.
  • The application temperature should be 65° F or above the get the best yield.

It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds.

Please note: This product cannot be sold or shipped to the following states: CA, CO, DE, MA, MD, NJ, NY, WA, or VT


Customer Reviews

Based on 33 reviews
79%
(26)
21%
(7)
0%
(0)
0%
(0)
0%
(0)
M
Mother Pearl
Fantastic Foam

My contractor used this foam to insulate my basement sill plate and underneath my den. He has installed this foam before in other homes. This foam had barely any odor to it; and I was extremely pleased that neither did I have to leave my home during installation nor be concerned about my pets. I would recommend this foam to anyone; BUT one needs to have it installed by a professional because of the chemicals in the foam and having to use protective gear and respirators. The cost was pretty expensive, but when purchased in quantity, there is a good discount.

R
Ross
easy-to-use

easy to use. went well installing the product.

K
Keith
Vega bond v600

I'm happy with it. Framed out the inside of a 20 ft. Shipping container all but 3 ft at the back were I built a wall with a door to the end. It covered everything except the wall across the back. Did not have no trouble at all with it , will buy some in a can to do the wall when I'm ready, don't think you can go wrong with it

R
Randall Gerik
Spray Foam Master

I was referred to a competitor's company by someone who uses them. After comparing prices and the "other" company tacking on $250 shipping, I went with Vega Bond instead. My friend came out to give me a hand and get me started, and remarked how he liked this brand better than the other. If you are a do it yourselfer then you'd be crazy to pay someone else to do this for you. Mine wasn't perfectly uniform but we were covering it anyway. If it is going to be exposed to view then a little practice may be in order, but the more I sprayed the better it looked. I seriously couldn't be any happier with this product. Can't wait til the next project!

S
Sarah Simpson
spray foam

great stuff will use again....

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed