The closed-cell formula for new construction or renovation projects for basements, attics, or anywhere you would need an air-tight seal. Unlike many of our competitors, this kit comes ready to spray with a 9.5 ft. Gun/Hose Assembly required safety gear, and 2 Fan & 6 Cone Nozzle Tips.
R-value is nearly R-7 per inch.
Can be used on subgrade applications
Acts as moisture/vapor barrier.
Stops Mold and Moisture.
Completely seals out unwanted air leaks.
Protects against dust, air infiltration, and sound.
Ready-to-use, disposable and recyclable.
ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)
If you are calculating the area of a wall use the wall width and height. If it is a ceiling, roof, basement, foundation, etc. then use the length and width of the surface area.
Calculator placeholder
HOW TO USE:
Whether you’re a seasoned professional or using a spray foam kit for the first time, here, you’ll find helpful information on how to use the Vega Bond spray foam insulation kit for the best results.
What’s In The Package? " Mask not Included"
Closed Cell Spray Foams Kits Fast Cure
Spray Nozzles
Spray Foam Hose and Applicator Assembly
Safety Coverall
Safety Glass
How To Use
Wear your protective gear. This includes a respirator, Glass, plastic hand gloves, and a protective work suit.
Thoroughly clean and dry the area you want to apply the foam
Ensure the tanks are at optimum temperature, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to an electric heater.
Fix your spray foam insulation kit as specified in the manual by securely connecting the hoses to the tanks. Then apply petroleum jelly on the spray gun face before attaching the nozzle.
Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes.
It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds.
Just used my foam kit it went on perfectly, the hose and spray gun made application super easy coverage was as advertised Great product will definitely use on our next project
R
Renard Sessions
repeat user
Product is awesome, arrives fast and has protective gear with plenty of nozzles.
V
Valerie Corsey
Excellent
Works exactly as described. Has done an amazing job in our crawl space as insulation and the start of our moisture barrier.
G
George Pulaski
Good stuff
Everything in the kit you need to insulate except for a respirator. Easy to use and apply. I think the estimation of coverage is a bit exaggerated but otherwise a good product.
G
Gary True
Great product!
I was very impressed with the Vega Bond V200 kit that I purchased. When I opened the box, I found everything I needed for my project. Enclosed where the two components of material in well-designed tanks., a suit and gloves to wear while working, several nozzles, the spray gun with hoses, and a wrench to tighten the hoses on to the tanks.
The application was very easy. The spray gun with nozzle worked flawlessly. The kit helps you to apply the foam insulation like a professional.
Thanks for the great product!
After several nights of research (swiping and watching videos), I decided to give the Purple Coat a shot. It did not disappoint! The final result is exactly what I was hoping for.
What surprised me most is the added structural strength it gives my shop. It’s almost like coating the building in truck bed liner—tough and durable.
The application process was simple and straightforward. Check out the attached video of my daughter using the product for the first time.
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Gary Hartshorne
Making a camper van
I bought 2 cases of the spray foam insulation to insulate a long wheel base super high top sprinter van. After masking off the area I sprayed about 2” on the walls and ceiling and the whole job, including over the cab took only 1 case and a half. In a test area 1 inch of foam had dropped the temp about 8* and cut the noise inside way down. I’m very happy with the product and the results!
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Igor
Canned insulation foam works like magic
Yep, it takes a bit getting used to and if the cans aren't 80 degrees not all of it will come out but once I got all the instructions dialed in this thing saved me hundred$$$
vbinsulation
Chris
Great Choice!
We love the easy use of the Vega Bond spray foam cans and flexibility. Applied to a steel 20x30 office walls and ceiling. Cans were almost exactly 20bdft per can as advertised. I really liked the purple on the white steel because you can see any thin areas or spots I missed. Will definitely buy again!
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Shawn
Good Product
Here's a draft review for the spray foam insulation product based on your feedback:
---
I discovered during my home theater renovation that my walls had no insulation, so I decided to use this spray foam insulation to create a good seal. The product works great and really made a difference in sealing up the space. However, I realized that applying it evenly is key. I should have slowed down and taken my time with each pass to get a more uniform finish. Overall, I'm happy with how well it performs.
Keep in mind that 20 Board Feet per can at 1" thickness is 10 Board Feet at 2" thick and 5 Board Feet at 4" thick. If foaming between 16" centered studs, 3.5" thick, each can of foam will cover about 4.73 linear feet (An 8' x 8' wall 3.5" deep will require about 10 cans). Allow each layer to expand fully before applying the next layer. Cleaner instructions say to leave cleaner attached to gun, but the can will reseal if you remove it from the gun (you will get some acetone on your gloves while unscrewing the can). *Remember, the cleaner is acetone and is flamable!
