Closed cell formula for new construction or renovation project for basements, attics, or anywhere you would need an air-tight seal. Unlike many of our competitors, this kit comes ready to spray with a 15 ft. Gun/Hose Assembly, required safety gear, and 2 fans & 6 Cone Nozzle Tips.
R-Value R-7 per inch. Apply to your exposed walls such as the basement, roof crawl space, foundation, concrete, or subgrade.
ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)
Stops Mold and Moisture.
Completely seals out unwanted air leaks.
Protects against dust, air infiltration, and sound.
Ready-to-use, disposable and recyclable.
If you are calculating the area of a wall using the wall width and height. If it is a ceiling, roof, basement, foundation, etc. then use the length and width of the surface area.
Calculator placeholder
HOW TO USE:
Whether you’re a seasoned professional or using a spray foam kit for the first time, here, you’ll find helpful information on how to use the Vega Bond spray foam insulation kit for the best results.
What’s In The Package? " Mask not Included"
Closed Cell Spray Foams Kits Fast Cure
Spray Nozzles(6 Cone Nozzles and 2 Fan Nozzle)
Spray Foam Hose and Applicator Assembly
Safety Coverall
Safety Glass
Gloves
User Manual
Foam Cleaner
How To Use
Wear your protective gear including safety glass, plastic hand gloves, and a protective work suit.
Thoroughly clean and dry the area you want to apply the foam
Ensure the tanks are between 75° F to 85° F, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to an electric heater.
Fix your spray foam insulation kit as specified in the manual by securely connecting the hoses to the tanks. Then apply petroleum jelly on the spray gun face before attaching the nozzle. Shake the canisters for at least 3 mins.
Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes.
The application temperature should be 65° F or above the get the best yield.
It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds.
It's priced at $150 less than a 630 froth pak with 30 foot hose. The foam is exactly the same in how it sprays and reacts.
The 15 foot hose is horrible. Way too short. You have to keep moving the tanks around. I've always used a 30 foot hose in the past.
Would buy again now that I understand what to expect.
The included tyvek suit is good but lacks foot protection.
K
Kristian
Great product.
This is the best product in its class. I have used the brands offered by the big box stores and they are all problematic. This kit worked problem free and covered as much as it advertised. The foam is super dense and application can be done by a novice.
A
Arthur Balourdos
VBinsulation
Outstanding product. Highly recommended. Easy to use.
m
m s
good stuff
the coverage was very close to the amount that the manufacturer states. the spray gun works well. do what the instruction videos say and you are good.
A
Andrew Dement
Fast shipping. Great customer service. Product doesn’t seem to get very far though. Buy extra
Covered ok, cans dont have near as much as they say in em, definitely better than nothing but just thought it would cover better! Did math and had 620ft to cover, ordered enough for 960ft and im still short!
This is the best product in its class. I have used the brands offered by the big box stores and they are all problematic. This kit worked problem free and covered as much as it advertised. The foam is super dense and application can be done by a novice.
This is the best product in its class. I have used the brands offered by the big box stores and they are all problematic. This kit worked problem free and covered as much as it advertised. The foam is super dense and application can be done by a novice.
Vega Bond V600 Closed Cell Spray Foam Fast Rise 600 Board Feet Kit
Daniel Griffin
Worth it!!
After several nights of research (swiping and watching videos), I decided to give the Purple Coat a shot. It did not disappoint! The final result is exactly what I was hoping for.
What surprised me most is the added structural strength it gives my shop. It’s almost like coating the building in truck bed liner—tough and durable.
The application process was simple and straightforward. Check out the attached video of my daughter using the product for the first time.
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Gary Hartshorne
Making a camper van
I bought 2 cases of the spray foam insulation to insulate a long wheel base super high top sprinter van. After masking off the area I sprayed about 2” on the walls and ceiling and the whole job, including over the cab took only 1 case and a half. In a test area 1 inch of foam had dropped the temp about 8* and cut the noise inside way down. I’m very happy with the product and the results!
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Igor
Canned insulation foam works like magic
Yep, it takes a bit getting used to and if the cans aren't 80 degrees not all of it will come out but once I got all the instructions dialed in this thing saved me hundred$$$
vbinsulation
Chris
Great Choice!
We love the easy use of the Vega Bond spray foam cans and flexibility. Applied to a steel 20x30 office walls and ceiling. Cans were almost exactly 20bdft per can as advertised. I really liked the purple on the white steel because you can see any thin areas or spots I missed. Will definitely buy again!
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
