Vega Bond V600 Closed Cell Spray Foam Fast Rise 600 Board Feet Kit

vbinsulationSKU: VBV600-CCSFFR200-BFK
filler

Price:
Sale price$869.00

Description

 This product SHIPS FREE !

 

Closed cell formula for new construction or renovation project for basements, attics, or anywhere you would need an air-tight seal. Unlike many of our competitors, this kit comes ready to spray with a 15 ft. Gun/Hose Assembly, required safety gear, and 2 fans & 6 Cone Nozzle Tips.

  • R-Value R-7 per inch. Apply to your exposed walls such as the basement, roof crawl space, foundation, concrete, or subgrade.
  • ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)
  • Stops Mold and Moisture.
  • Completely seals out unwanted air leaks.
  • Protects against dust, air infiltration, and sound.
  • Ready-to-use, disposable and recyclable.

If you are calculating the area of a wall using the wall width and height. If it is a ceiling, roof, basement, foundation, etc. then use the length and width of the surface area. 

Calculator placeholder

 

HOW TO USE:

Whether you’re a seasoned professional or using a spray foam kit for the first time, here, you’ll find helpful information on how to use the Vega Bond spray foam insulation kit for the best results.

What’s In The Package? " Mask not Included"

  • Closed Cell Spray Foams Kits Fast Cure
  • Spray Nozzles(6 Cone Nozzles and 2 Fan Nozzle)
  • Spray Foam Hose and Applicator Assembly 
  • Safety Coverall
  • Safety Glass
  • Gloves
  • User Manual
  • Foam Cleaner

 How To Use

  • Wear your protective gear including safety glass, plastic hand gloves, and a protective work suit.
  • Thoroughly clean and dry the area you want to apply the foam
  • Ensure the tanks are between 75° F to 85° F, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to an electric heater.
  • Fix your spray foam insulation kit as specified in the manual by securely connecting the hoses to the tanks. Then apply petroleum jelly on the spray gun face before attaching the nozzle. Shake the canisters for at least 3 mins.
  • Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes.
  • The application temperature should be 65° F or above the get the best yield.

It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds.

Please note: This product cannot be sold or shipped to the following states: CA, CO, DE, MA, MD, NJ, NY, WA, or VT


Customer Reviews

Based on 43 reviews
77%
(33)
21%
(9)
2%
(1)
0%
(0)
0%
(0)
J
John
I expected bette.

I needed to spray a ceiling under a concrete porch. While spraying, foam kept running down the spray nozzle and all over my hand and trigger. The suit that comes with it is too small. The sleeves are not long enough, which left about 3 inches of my arm exposed. You do get 2 pairs of gloves, I needed a couple more pairs as I had to change them each time I changed out the nozzle. The product did foam up well. Based on the calculation, I needed a little more than 400 board fee for 2" depth. I ended up using the entire kit as I wanted to be sure I sprayed enough. If you plan on spraying a ceiling, don't us the glasses that are provided in the kit. Buy a good pair of goggles that fits well. My eyes became irritated and teared up while spraying.

T
Thomas C
Vega bond v600 kit

Purchased 2 v600 kits and these kits are awesome. I got great coverage at 2 inches thick. Just follow their recommendations for spraying and you will not be disappointed! You receive plenty of spare spray nozzles so you can take a break when needed.

J
Joel Robertson
Pleasantly went further than expected

I had three areas to do: one in my shop (where the wall met the roof) and two in my basement (rim joists). I expected the shop to use about half and the remainder for my basement. I did the shop first. I made one pass and got everything thoroughly. I noticed the pressure starting to drop when I was almost to the end of the wall, so I was hoping I would have enough for the basement. I carted everything down to the house, put on a new nozzle, and sprayed the first basement area, then moved to the second area and sprayed it using another new nozzle. Then I ran out of places to spray at the house and the tanks seemed to have quite a bit still in them. I was ready to be done for the day (and the tanks were cooling off from my cool basement), so I carted it all back up to my shop, and put it aside. The next evening, I put on a new nozzle, and sprayed at least as much as I had the first time. So I now not only have a great seal, I have some pretty thick insulation. It's hard to say exactly how much as where I was spraying was oddly shaped and uneven from the original (poorly covered) spray foam application.

My nits with the system: 1) When installing a nozzle, the handle does not provide a good opposing surface to squeeze against, especially if you have small hands. (However, removing the nozzles were a breeze.) 2) The latex gloves were super cheap and ripped too easily, so I used my own nitrile gloves. 3) The bunny suit arms were too short for this application. Realize that you are spraying with your arms raised—likely above your shoulders, which causes the sleeves to pull up your arm and expose your wrist and forearm. I had to wrap my forearms with rags and hold them on with rubber bands to cover the gap.

I would not hesitate to purchase and use this product again, but with few tweaks, it could be even better.

E
Eddie Clingen
Great customer service and product works

First let me say I don't write reviews very often. I had an issue with one of the kits I purchased. I believe that the gun was bad. This caused me not to get the correct mixture of produce coming out the gun. I reached out by email and the next day I had a response. A great response! I was simply asked a few questions and they shipped me what I needed at zero cost. I have used this product 4 times now it it does what it should. The temperature is key as they tell you. It does also appear that you get the 600 feet out of it. It's messy when doing ceilings but that is expected. I'm glad to see a company stand behind their product.

R
Robert Bailey
I haven't applyed it yet.

Very satisfied so far

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed