Closed cell formula for new construction or renovation project for basements, attics, or anywhere you would need an air-tight seal. Unlike many of our competitors, this kit comes ready to spray with a 15 ft. Gun/Hose Assembly, required safety gear, and 2 fans & 6 Cone Nozzle Tips.
R-Value R-7 per inch. Apply to your exposed walls such as the basement, roof crawl space, foundation, concrete, or subgrade.
ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)
Stops Mold and Moisture.
Completely seals out unwanted air leaks.
Protects against dust, air infiltration, and sound.
Ready-to-use, disposable and recyclable.
If you are calculating the area of a wall using the wall width and height. If it is a ceiling, roof, basement, foundation, etc. then use the length and width of the surface area.
Calculator placeholder
HOW TO USE:
Whether you’re a seasoned professional or using a spray foam kit for the first time, here, you’ll find helpful information on how to use the Vega Bond spray foam insulation kit for the best results.
What’s In The Package? " Mask not Included"
Closed Cell Spray Foams Kits Fast Cure
Spray Nozzles(6 Cone Nozzles and 2 Fan Nozzle)
Spray Foam Hose and Applicator Assembly
Safety Coverall
Safety Glass
Gloves
User Manual
Foam Cleaner
How To Use
Wear your protective gear including safety glass, plastic hand gloves, and a protective work suit.
Thoroughly clean and dry the area you want to apply the foam
Ensure the tanks are between 75° F to 85° F, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to an electric heater.
Fix your spray foam insulation kit as specified in the manual by securely connecting the hoses to the tanks. Then apply petroleum jelly on the spray gun face before attaching the nozzle. Shake the canisters for at least 3 mins.
Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes.
The application temperature should be 65° F or above the get the best yield.
It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds.
But it didn’t cover near the area i thought it would. It figured to be 2 cans, but i would’ve actually needed at least three.
M
M.S.
Works good for DIY.
J
Jessica Ramsey
Great Product
Went on great no issues.
J
John Kacinko
I expected bette.
I needed to spray a ceiling under a concrete porch. While spraying, foam kept running down the spray nozzle and all over my hand and trigger. The suit that comes with it is too small. The sleeves are not long enough, which left about 3 inches of my arm exposed. You do get 2 pairs of gloves, I needed a couple more pairs as I had to change them each time I changed out the nozzle. The product did foam up well. Based on the calculation, I needed a little more than 400 board fee for 2" depth. I ended up using the entire kit as I wanted to be sure I sprayed enough. If you plan on spraying a ceiling, don't us the glasses that are provided in the kit. Buy a good pair of goggles that fits well. My eyes became irritated and teared up while spraying.
T
Thomas Cavanaugh
Vega bond v600 kit
Purchased 2 v600 kits and these kits are awesome. I got great coverage at 2 inches thick. Just follow their recommendations for spraying and you will not be disappointed! You receive plenty of spare spray nozzles so you can take a break when needed.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us atsupport@vbinsulation.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
Your return will be accepted if they were never used and with all the accessories in the box.
Upon receiving the your return you can expect your refund in 3 to 5 business days.
You can always contact us for any return question atsupport@vbinsulation.com. or call us at 404 836 7055
Damages and issues Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you will be refunded on your original payment method with in 3 to 5 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Perfect. I've used other brands before and this one is the best. Overhead spraying if a bit wonky because the can needs to be kept at verticle. But coverage if great and there was no waste! I'll use again for my next project.
We love the easy use of the Vega Bond spray foam cans and flexibility. Applied to a steel 20x30 office walls and ceiling. Cans were almost exactly 20bdft per can as advertised. I really liked the purple on the white steel because you can see any thin areas or spots I missed. Will definitely buy again!
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Shawn
Good Product
Here's a draft review for the spray foam insulation product based on your feedback:
---
I discovered during my home theater renovation that my walls had no insulation, so I decided to use this spray foam insulation to create a good seal. The product works great and really made a difference in sealing up the space. However, I realized that applying it evenly is key. I should have slowed down and taken my time with each pass to get a more uniform finish. Overall, I'm happy with how well it performs.
vbinsulation
Steve Burkes
Far superior product
Can't say enough how great this product is. From the gear ,gun and quality. I've used alot of others this is the on you want.
vbinsulation
Bobby Slayton
Great product
This was very easy to use spray foamed my shop in about 2.5 hrs. Follow the directions and change your tips. Very easy to install will make a mess on floors so make sure to cover everything.
Vega Bond V600 Closed Cell Spray Foam Fast Rise 600 Board Feet Kit
Jerry Frye
Very good product
I am adding on additional square footage to our barndominium, this stuff works great! It is very easy to apply, not messy, took me a couple hours to do my first coat on 400 ft.². I have quite a bit more to go, but will continue using this product to complete this additional space.
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)