Closed cell formula for new construction or renovation project for basements, attics, or anywhere you would need an air-tight seal. Unlike many of our competitors, this kit comes ready to spray with a 15 ft. Gun/Hose Assembly, required safety gear, and 2 fans & 6 Cone Nozzle Tips.
R-Value R-7 per inch. Apply to your exposed walls such as the basement, roof crawl space, foundation, concrete, or subgrade.
ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)
Stops Mold and Moisture.
Completely seals out unwanted air leaks.
Protects against dust, air infiltration, and sound.
Ready-to-use, disposable and recyclable.
If you are calculating the area of a wall using the wall width and height. If it is a ceiling, roof, basement, foundation, etc. then use the length and width of the surface area.
Calculator placeholder
HOW TO USE:
Whether you’re a seasoned professional or using a spray foam kit for the first time, here, you’ll find helpful information on how to use the Vega Bond spray foam insulation kit for the best results.
What’s In The Package? " Mask not Included"
Closed Cell Spray Foams Kits Fast Cure
Spray Nozzles(6 Cone Nozzles and 2 Fan Nozzle)
Spray Foam Hose and Applicator Assembly
Safety Coverall
Safety Glass
Gloves
User Manual
Foam Cleaner
How To Use
Wear your protective gear including safety glass, plastic hand gloves, and a protective work suit.
Thoroughly clean and dry the area you want to apply the foam
Ensure the tanks are between 75° F to 85° F, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to an electric heater.
Fix your spray foam insulation kit as specified in the manual by securely connecting the hoses to the tanks. Then apply petroleum jelly on the spray gun face before attaching the nozzle. Shake the canisters for at least 3 mins.
Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes.
The application temperature should be 65° F or above the get the best yield.
It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds.
Please note: This product cannot be sold or shipped to the following states: CA, CO, DE, MA, MD, NJ, NY, WA, or VT
Overall satisfied with the product. It had good coverage. The only negative is the gun/sprayer was pretty cheap and couldn’t handle that much foam/ heat. Even when changing the nozzles, it seemed like the gun couldn’t handle the pressure/ chemical reaction.
S
Sean Riley
Good Product
I was happy with the ease of use with this product. It didn't take long to get the hang of it. Definitely recommend using extra petroleum jelly or A&D on face and wrists as well as spray gun. Use shoe covers or disposable footwear and cover anything you don't want covered with foam splotches. Out of 10 sets, 2 of the guns were defective and Vega Bond made it right with me giving me a good discount to make up for lost material.
B
Bob Ward
Wow
Let me start by saying I am happy with this product and the service from Vegabond. I knew this was going to be a lot of work since it is all overhead in our ceiling. We had minor issues with tips staying on and a gun broke. We ended up losing some of the product and had quite a mess. Customer service helped us with cost as I needed more canisters. We are building a 1200 sq ft home, basic roof line, and a 4/12 pitch. The calculator said it would take 7 kits to achieve 3” thick for ceiling to consider it r-30 ish rating. It actually took 10 and I could probably use 1 more to touch up some areas that appear thin. If you are a DIY person this is great but remember to cover everything and be prepared to clean up overspray mess.
b
bobby slayton
Great product
This was very easy to use spray foamed my shop in about 2.5 hrs. Follow the directions and change your tips. Very easy to install will make a mess on floors so make sure to cover everything.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us atsupport@vbinsulation.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
Your return will be accepted if they were never used and with all the accessories in the box.
Upon receiving the your return you can expect your refund in 3 to 5 business days.
You can always contact us for any return question atsupport@vbinsulation.com. or call us at 404 836 7055
Damages and issues Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you will be refunded on your original payment method with in 3 to 5 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Been using this for a few years on my full home renovation, and it's the best option for convenience, since I don't have to spray the whole house or a whole room all at once. I can open and use the cans as I go and not worry about having to stop like I would if I was using large cannisters and hoses.
This was very easy to use spray foamed my shop in about 2.5 hrs. Follow the directions and change your tips. Very easy to install will make a mess on floors so make sure to cover everything.
Vega Bond V600 Closed Cell Spray Foam Fast Rise 600 Board Feet Kit
Jerry
Very good product
I am adding on additional square footage to our barndominium, this stuff works great! It is very easy to apply, not messy, took me a couple hours to do my first coat on 400 ft.². I have quite a bit more to go, but will continue using this product to complete this additional space.
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Pauline S
Vega Bond Purple coat 12 pk kit
We ordered three 12 pack kits. Product arrived on target date provided by company. Kit arrived with the 12 cans of spray foam, gun, cleaning spray as well as googles and gloves for protection. Good customer service on my chat and email inquiries. Have read the good reviews, so we're anxious to get started out our project! Will update my review once we have applied it.
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
James K Miller Millet
Just right for a small job. I have 160 square-foot building just right for this job it worked good
I can do one section at a time as I can afford it. I’m not out thousands of dollars at one time. Just watch the videos and take your time start slow
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Richard Ory
Great spray foam
I used the spray foam for HVAC hard pipe under a house. Easy to use and all materials sent.
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)