Closed cell formula for new construction or renovation project for basements, attics, or anywhere you would need an air-tight seal. Unlike many of our competitors, this kit comes ready to spray with a 15 ft. Gun/Hose Assembly, required safety gear, and 2 fans & 6 Cone Nozzle Tips.
R-Value R-7 per inch. Apply to your exposed walls such as the basement, roof crawl space, foundation, concrete, or subgrade.
ASTM E84 Approved Class A Building Material (Lowest Fire Spread Rate and Minimal Smoke Production)
Stops Mold and Moisture.
Completely seals out unwanted air leaks.
Protects against dust, air infiltration, and sound.
Ready-to-use, disposable and recyclable.
If you are calculating the area of a wall using the wall width and height. If it is a ceiling, roof, basement, foundation, etc. then use the length and width of the surface area.
Calculator placeholder
HOW TO USE:
Whether you’re a seasoned professional or using a spray foam kit for the first time, here, you’ll find helpful information on how to use the Vega Bond spray foam insulation kit for the best results.
What’s In The Package? " Mask not Included"
Closed Cell Spray Foams Kits Fast Cure
Spray Nozzles(6 Cone Nozzles and 2 Fan Nozzle)
Spray Foam Hose and Applicator Assembly
Safety Coverall
Safety Glass
Gloves
User Manual
Foam Cleaner
How To Use
Wear your protective gear including safety glass, plastic hand gloves, and a protective work suit.
Thoroughly clean and dry the area you want to apply the foam
Ensure the tanks are between 75° F to 85° F, and if not, you can either allow them to cool down or warm them up. Do not use open flames or a blow torch to warm the tank. You can do so by keeping them at room temperature or bringing them close to an electric heater.
Fix your spray foam insulation kit as specified in the manual by securely connecting the hoses to the tanks. Then apply petroleum jelly on the spray gun face before attaching the nozzle. Shake the canisters for at least 3 mins.
Spray evenly on the intended surface by squeezing the trigger. Also, keep in mind that the spray foam rises in size and solidifies after a few minutes.
The application temperature should be 65° F or above the get the best yield.
It is recommended that you change the nozzle after 8 minutes of continuous spraying or if you stop spraying for about 30 seconds.
Low GW formula- ships to all states.
Roll over image to zoom inClick on image to zoom
/
You may also like
Recently viewed
Free shipping
Short content about your store
Satisfied or refunded
Short content about your store
Top-notch support
Short content about your store
Secure payments
Short content about your store
Opens in a new window.
Gary Hartshorne
Making a camper van
I bought 2 cases of the spray foam insulation to insulate a long wheel base super high top sprinter van. After masking off the area I sprayed about 2” on the walls and ceiling and the whole job, including over the cab took only 1 case and a half. In a test area 1 inch of foam had dropped the temp about 8* and cut the noise inside way down. I’m very happy with the product and the results!
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Igor
Canned insulation foam works like magic
Yep, it takes a bit getting used to and if the cans aren't 80 degrees not all of it will come out but once I got all the instructions dialed in this thing saved me hundred$$$
vbinsulation
Chris
Great Choice!
We love the easy use of the Vega Bond spray foam cans and flexibility. Applied to a steel 20x30 office walls and ceiling. Cans were almost exactly 20bdft per can as advertised. I really liked the purple on the white steel because you can see any thin areas or spots I missed. Will definitely buy again!
Vega Bond Purplecoat Single Component Closed Cell Spray Foam Insulation Kit (Covers 20 Board Feet Per Can at 1 inch thickness)
Shawn
Good Product
Here's a draft review for the spray foam insulation product based on your feedback:
---
I discovered during my home theater renovation that my walls had no insulation, so I decided to use this spray foam insulation to create a good seal. The product works great and really made a difference in sealing up the space. However, I realized that applying it evenly is key. I should have slowed down and taken my time with each pass to get a more uniform finish. Overall, I'm happy with how well it performs.
vbinsulation
Steve Burkes
Far superior product
Can't say enough how great this product is. From the gear ,gun and quality. I've used alot of others this is the on you want.
I used your product to insulate the underside of my 4 seasons room. i decided to use this instead of foam sheets. My only complaint is the amount of coverage advertised. Maybe the product would be closer to the advertised coverage if it is not an overhead application.
I bought 2 cases of the spray foam insulation to insulate a long wheel base super high top sprinter van. After masking off the area I sprayed about 2” on the walls and ceiling and the whole job, including over the cab took only 1 case and a half. In a test area 1 inch of foam had dropped the temp about 8* and cut the noise inside way down. I’m very happy with the product and the results!
These fan tips are good enough. The fact is that they sag in performance very quickly and generally perform poorly until you change one out. Also, I think it would make more sense to include 6 fan spray tips and cone tips in the package.
